Micro Flow Series cartridges: 0.5 µL, 1 µL, 2 µL, 5 µL, 10 µL and 25 µL are interchangeable and fit in all Micro Flow Series In-line, Binary tee and Ternary tee housings.

Delay volume specified below was calculated based on an ASI engineering drawing. The delay volume can be verified by injecting a sample at a known flow rate, then measuring the time this sample first appears at the exit of the mixer.

Back pressure varies directly with flow rate. For example, if the back pressure is 250 PSI at 10 µL/min., it will be 25 PSI at 1 µL/min.

High Temperature rating above 40°C is available.

If you need the mounting tap holes at the bottom, you will need to buy a housing separately.  The mounting option is available only for Binary housing. 

Current stock: 0

0.5 µL Standard HPLC Static Mixer

Part Number: 401-000.5
Housing Assembly *

Port size: 10-32 CPI (standard HPLC fittings for 1/16" tube)

Compatible with Thermo Scientific™ nanoViper™ Fingertight Fittings

Maximum Operating Pressure: 6,000 PSI

Maximum Temperature Rating: 40 °C

Delay volume: .5 µL

Back pressure: < 250 PSI @ 10 µL/min. with water

Part Number:
Wetted Material:
316 Stainless Steel, PEEK

0 Reviews

Be the first to review this product.

Add a Review