Delay volume specified below was calculated based on an ASI engineering drawing. The delay volume can be verified by injecting a sample at a known flow rate, then measuring the time this sample first appears at the exit of the mixer.
Back pressure varies directly with flow rate. For example, if the back pressure is 250 PSI at 10 µL/min., it will be 25 PSI at 1 µL/min.
Note: Since we warranty the Max Operating Temperature: 80°C on the factory tested mixer assembly (housing and cartridge), High Temperature Static Mixers are only sold as complete assemblies.
Current stock:
0
0.5 µL Static Mixer, High Temperature
US$973.50
Part Number: 401-000.5HT
- Specifications:
Port size: 10-32 CPI (standard HPLC fittings for 1/16" tube)
Compatible with Thermo Scientific™ nanoViper™ Fingertight Fittings
Maximum Operating Pressure: 6,000 PSI and 12,000 PSI
Maximum Temperature Rating: 80 °C
Delay volume: .5 µL
Back pressure: < 250 PSI @ 10 µL/min. with water
- Part Number:
- 401-000.5HT
- Wetted Material:
- 316 Stainless Steel, PEEK
