Micro Flow Series cartridges: 0.5 µL, 1 µL, 2 µL, 5 µL, 10 µL and 25 µL are interchangeable and fit in all Micro Flow Series In-line, Binary tee and Ternary tee housings.
Delay volume specified below was calculated based on an ASI engineering drawing. The delay volume can be verified by injecting a sample at a known flow rate, then measuring the time this sample first appears at the exit of the mixer.
Back pressure varies directly with flow rate. For example, if the back pressure is 250 PSI at 10 µL/min., it will be 25 PSI at 1 µL/min.
PEEK fittings should be used and Stainless Steel fittings should NOT be used. PEEK fittings are not included. If you need the fittings, please order PEEK Fingertight Fitting for 1/16" Tube 800-0630 separately.
Current stock:
0
0.5 µL Biocompatible PEEK Static Mixer
US$706.00
Part Number: 401-000.5B
- Specifications:
Port size: 10-32 CPI (standard HPLC fittings for 1/16" tube)
Maximum Operating Pressure: 3,000 PSI
Maximum Temperature Rating: 40 °C
Delay volume: .5 µL
Back pressure: < 250 PSI @ 10 µL/min. with water
- Part Number:
- 401-000.5B
- Wetted Material:
- PEEK
